Crystal Home Improvement

Spend some time this weekend on home improvement; improve your attitude toward your family.


Brick and Mortar Buildings and Water Proofing

Scientifically erosion occurs when the natural elements, wind, rain, sun, blow against brick and mortar, otherwise called rocks, boulders, etc. Since most buildings are made of brick and mortar nowadays, erosion can cause structural damage which can get costly. Businesses, as well as homeowners and realtors, see the prospects of the effects erosion could have on their properties. For this reason, many seek to waterproof. Waterproofing is essentially sealing up whatever cracks might be in a mortar surface and adding a protective coating to the exterior surface of the mortar that could be affected by water which causes water damage. There are many businesses that provide waterproofing services. For instance, exterior waterproofing st. paul can be accessed via a telephone directory, etc. to find a service in a particular area, location or city.

The process of waterproofing entails making the concrete or wood surface of a building resistant to water. Water damage to wood can result in rotting. Standing water and moisture causes dampness and mildew, which eats away at surfaces like concrete and wood.

Materials used in waterproofing include plastics like epoxide, polyester, and polyvinyl. There are some lacquers and paints utilized when there is a need to paint and waterproof surfaces. Some plasters are utilized in waterproofing. Plasters such as polymer mortars, concretes and faizol. And there are some glues like polyethylene, polyvinyl chloride tapes, and ethanol that are utilized in this process. Chemicals like Conpro SB-4, a styrene butadiene copolymer emulsion based additive that produces a bonding effect in concrete to make them stronger and more resistant to the erosive effects of water and other elements are used when sealing surfaces.

In the construction industry, these things are considered, so precautionary measures are practiced to prevent the damage as much as possible. Since the materials utilized go through everyday wear and tear also, It becomes necessary to treat and retreat these kinds of surfaces as time progresses. Therefore, there are many businesses that specialize or provide this service in addition to their other services and products. Waterproofing materials are a rule of thumb for concrete and construction companies and businesses.

Waterproofing the interiors of the concrete or wood through cracks and crannies is called the membrane method. With the membrane method, which is mostly used for flat surfaces to prevent water leakage to the inside of the wood or concrete involves spraying the liquid additive atop the surface and letting it dry. Water leaking through flat wood surfaces like patio decks, etc. will cause the wood to rot. Water leaking into concrete will create a moist environment in the concrete which will cause mildew and subsequently structural damage.

Waterproofing agents are generally sprayed or applied on to surfaces utilizing such tools as paint brushes, spray canisters, etc. All waterproofing agents must be allowed to dry, otherwise, the chemicals cannot bond and the waterproofing will not take effect. The best practice when waterproofing is to make sure that the surface is clean and dry before starting the process.